Durable.
After the cooling process, the feed passes through a sieve and then goes through an oiling chamber for homogeneous coating. Flow rate is controlled by the load cell installed in the chamber. The pellet feed flowing through the chamber is sprayed with oil by the nozzle system. The special mixing screw under the chamber ensures the feed is fully coated during the process.

According to the information received from the loadcell in the fat coating inlet throat, the amount of oil sent to the nozzles in the oiling throat can be adjusted from the pump. The amount of oil added to the product is controlled by the flow meter.

The pellet flowing in the form of a curtain is sprayed on the product with the help of oil air pressure coming to the nozzles mounted on the oiling throat of Yemmak oil coating. By the help of compressed air passing through the nozzles, nozzle clogging is prevented and spraying is provided. Fat coaters can be produced as single- or double-shaft depending on the capacity requirement. The frames of these machines are made of fine quality stainless steel to withstand the exposure to liquid additives.